Enviro-MT™

10-Year Limited Warranty

EnviroShield, LLC (“Company”) warrants that all surfaces properly coated with Enviro-MT™, by an approved applicator, will not support the growth of mold for a period of ten (10) years.

CONDITIONS OF WARRANTY

his warranty shall apply only if the application of the product was in accordance with written instructions on EnviroShield’s labels and other literature. Including but not limited to:

  • The treated surface is dry to damp. Enviro-MT™ cannot be applied to surfaces with standing water.
  • The surface is prepped by an approved applicator;
  • The ambient temperature is above 50 degrees until the EnviroShield is cured.
  • The product was mixed per instructions and not diluted or modified.
  • The product was stored according to written instructions between times of purchase and application.
  • EnviroShield is notified of such mold or mildew growth in writing by the Applicator within 30 days of discovery

EXCLUSIONS

Anyone can warranty against mold on dry surfaces, but EnviroShield’s warranty is good when most needed: when surfaces get wet.

If the surface is intact, EnviroShield warrants that its coating surface will not support the growth of mold, even mold caused by a lack of proper plumbing maintenance.

LIMITATION OF WARRANTY

This warranty is limited to replacement of the defective materials in the affected area only or, at Company’s sole election, refund of a pro-rata portion of the material cost for the affected area. No other claims or demands whatsoever shall be made upon or allowed against the Company.

This Limited Warranty is exclusive and in lieu of all other warranties of any kind or nature whatsoever, express or implied. All implied warranties, including, but not limited to, implied warranties of good performance, merchantability and fitness for particular purpose are hereby excluded and disclaimed. Any and all remedies Owner may have against Company for defects in materials are limited, as set forth in this Limited Warranty, and in no event shall Company be liable to Owner for incidental or consequential damages, including, but not limited to, lost profits, business interruption expenses, and/or expenses incurred in moving and/or storing occupants, equipment, or inventory which might be affected by repair operations. No representative of EnviroShield has authority to give any other warranty or assume other liabilities.

This Limited Warranty is transferable. Company does not warrant against, and specifically disclaims any liability for, any defect or failure, including:

  • blistering, peeling, cracking or delamination, caused in whole or in part by: alkali silica reaction (ASR), water vapor transmission (WVT) greater than 8 pounds;
  • cosmetic defects; scraping, gouging, staining, or discoloration;
  • building alterations; improper design or construction of the substrate on which materials are applied;
  • failure of coating or material installed over the Enviro-MT;

It shall be the Owner’s responsibility to secure the necessary approvals or releases of liability from building occupants who might be affected by the repair operations, and to remove at his cost any obstructions from the affected areas that would hinder repairs being made in the most expedient manner possible. The Company and any installers hired by the Company will have free access to the project area and related premises during normal working hours for repairs pursuant to this Limited Warranty.

warranty